Features - BraunAbility Simple Stow Operator's Manual

FEATURES

Ramp Access Passenger Side
Sliding Door: ADA-compliant
manual sliding door provides
56-1/4" vertical opening (with
interlock and entrance lighting).
Note: The driver-side sliding
door opening is lowered to pro-
vide clear passage also.
Simple Stow™ Infloor Ramp:
The ADA-compliant manually
operated infloor ramp provides an
unobstructed doorway, maximum
visibility and increased interior
space (30" usable ramp width).
Lowered Floor from Rear Axle
to Toe Pan: This feature pro-
vides additional headroom, and
further reduces the slope of the
ramp. Commercial grade floor-
ing is featured throughout the
lowered floor area.
Page 6
Ground Clearance: The lowered
floor results in reduced ground
clearance. Be aware of limited
ground clearance.
Ground Effects: Exterior ground
effect panels conceal the lowered
floor and lowered sliding doors.
Forward-Facing Wheelchair
Tiedown and Occupant
Restraint System: Floor track
(anchorage point) provided in the
front passenger seat and mid-
row lowered floor areas can be
utilized for restraint of wheelchair
passenger(s). See Figure 1 for
anchorage point locations and
wheelchair mounting positions
(Positions B and C).
One Forward-Facing Wheelchair
Tiedown and Occupant Restraint
Belt Kit is supplied for the tie down
of one wheelchair and restraint
of an occupant. The belt/tie-
down kit is used in conjunction
with the floor track (anchorage
points). Additional restraint sys-
tems can be purchased (option).
Note: Wheelchair capacity may
be limited based on the dimen-
sions of specific wheelchairs
and vehicle payload capacity.
Driver Seat: The OEM driver
seat is mounted to a fixed
(non-removable) seat base riser
(Position A).
Quick-Release Front Pas-
senger Seat: The front pas-
senger seat is equipped with
quick-release seat base attach-
ments making seat removal and
installation procedures simple
(Position B).