Table of Contents
Advertisement
SEAT OPERATION / REMOVAL / INSTALLATION
Passenger Front Seat Base
Quick-release seat base
(riser) attachments engage
recessed floor strikers. A
foot-activated release pedal
is located at the rear of the
seat base. Stepping on the
pedal disengages the attach-
ments and deploys the seat
base rear wheels.
Note: For ease of disengage-
ment, move the seat to the
full forward and upright posi-
tion before removing seat.
Push the seat back forward
and upward while stepping
on release foot pedal (en-
sures full deployment of rear
wheels).
Page 40
Seat shroud
cut-away for
clarity.
Push seat back forward and upward
while stepping on foot pedal.
Release
Pedal
Removal Instructions
1. Move seat to full forward and
upright position.
2. Caution! Disconnect seat wiring
harness before removing seat
base. Connect harness to seat
base socket. See pages 37-39
for wiring harness details.
3. Depress release pedal (push
down until it locks). Note: Push
seat back forward and upward
while stepping on release pedal
(shown at left). See Figures
A-D.
4. Pull up and back on the rear of
seat (deploy front wheels). See
Figures E and F.
5. Roll seat base out of vehicle as
shown.
Advertisement
Table of Contents
