Table of Contents
Advertisement
WHEELCHAIR TIEDOWN AND OCCUPANT RESTRAINT
Occupant Restraint
Multi-Piece Chest & Waist Belt
The multi-piece chest and waist
belt assembly provides separate
lap and shoulder belts that can be
routed and positioned indepen-
dently.
Lap Belt (2 Piece): One of the
two lap belts is equipped with a
female receptacle. The mating lap
belt is equipped with the buckle.
The opposite end of each lap belt
is equipped with a slotted female
fitting that attaches to the corre-
sponding wheelchair rear tiedown
strap (at floor-mount keeper
anchor point). See photos at right
and instructions on pages 30-33.
Wheelchair tiedown straps provide
a short belt assembly equipped
Page 20
with a lap belt attachment (pin
fitting connector). See photo on
page 18. Connect the lap belt
slotted fitting to the mating pin
fitting (engage pin in slot). Adjust
lap belts as needed using belt
adjuster.
Shoulder Belt: The adjustable
shoulder belt is equipped with a
slotted female fitting that attaches
to the lap belt (equipped with a
pin fitting). The opposite (up-
per) end of the belt is equipped
with a pin fitting that attaches to
the vehicle-mounted shoulder
belt adaptor (adaptors located
at OEM shoulder belt positions).
Shoulder belt adaptors are
equipped with a slotted female fit-
ting that attaches to the shoulder
belt buckle pin fitting.
2-Piece Waist
Chest
(Lap) Belt
(Shoulder)
(female)
(male)
Belt
Advertisement
Table of Contents
