Auxiliary Power Supply / Below Floor Obstructions - BraunAbility Simple Stow Operator's Manual

Side-entry infloor ramp built on the chrysler pacifica / voyager
Hide thumbs Also See for Simple Stow:
Table of Contents

Advertisement

AUXILIARY POWER SUPPLY / BELOW FLOOR OBSTRUCTIONS

Note: The technical informa-
tion provided on pages 50-53 of
this manual is service related.
If you are having an electri-
cal tie-down, power seat or
other auxiliary electrical device
installed in your vehicle, this
information should be supplied
to the technician.
Do not connect
auxiliary devices to
vehicle battery. Doing
so may result in dam-
age to electrical sys-
tem and/or electronic
components.
Page 50
Auxiliary Power Supply: Do not
connect auxiliary devices directly
to the vehicle battery. Doing so
may result in damage to electrical
system and/or electronic compo-
nents.
Two fuse blocks are provided
as an auxiliary power source for
dealer-installed auxiliary electri-
cal device(s). Fuse block details
and specifications are provided
on following page. The fuse
blocks are located at the bottom
of the center console.
Below Floor Obstructions:
When installing aftermarket
equipment, obstructions below
the floor must be avoided. Ob-
structions include wiring, fuel
system, brake lines, etc. In-
stallers must be aware of these
obstructions.
Refer to the illustration on page 53
to avoid contacting or damaging
vital components under the floor.
Risk of electrical fire!
Install and electrically
terminate auxiliary
electrical device as
specified by device
manufacturer.

Advertisement

Table of Contents
loading

Table of Contents