Table of Contents
Advertisement
AUXILIARY POWER SUPPLY / BELOW FLOOR OBSTRUCTIONS
Below Floor Obstructions
When installing an electrical
tie-down, power seat or other
aftermarket electrical device,
obstructions below the floor must
be avoided. Obstructions include
wiring, fuel system, brake lines,
etc. Installers must be aware of
these obstructions.
Check for obstruc-
tions such as wires,
gas lines, exhaust,
etc. before drilling or
cutting through floor.
Failure to do so may
result in serious
bodily injury and/or
property damage.
Page 52
Refer to the illustration on the
following page when installing
aftermarket equipment to avoid
contacting or damaging vital
components under the floor.
Drilling or cutting into such ob-
structions may result in potential
hazards as well as property
damage.
Note: Some wiring harnesses
shown may not be present.
Avoid all harness locations.
Risk of electrical fire!
Install and electrically
terminate auxiliary
electrical device as
specified by device
manufacturer.
Advertisement
Table of Contents
