SERVICING AND MAINTENANCE
Suspension System
Keep arm junctions, screw brackets and other mechanical
parts free from dust and paint chips.
Moving parts may need lubrication after
some period of use.
Speedheater model 1100-04T
For all types of cleaning / maintenance / repair of the device, make sure that the electrical power cord has
been disconnected from the outlet and that the device is not carrying a charge before any work is done.
Cleaning - Maintenance
In order to maintain the product's safety and effectiveness, the IR tubes and reflectors must be kept clean.
1
Make sure that the device has cooled.
Unfasten the protective grille by removing the screws (1) located at the short ends of the
heating surface.
Remove the protective grille (2)
Carefully remove the end covers on the reflector (3).
2
1
Carefully wipe the accessible parts of the IR tubes,
3
reflector, reflector end covers and the protective grille.
Use a soft cloth moistened with methylated spirits.
If the surfaces are heavily soiled, Autosol cleaner can
be used; then wipe down using methylated spirits.
Avoid scraping with sharp objects.
Reinstall the reflector end covers and protective grille and
make sure that the screws are properly fastened.
3
ENG 10
Need help?
Do you have a question about the SH IR System Professional T and is the answer not in the manual?