Table of Contents
Advertisement
Tape Dubbing
Notes
+
When connecting the VCRs,
do not connect both LINE IN
(1 or 2) and LINE OUT jacks
on your VCRs simultaneously.
Doing so may cause a
humming noise.
+
To avoid deterioration of
picture quality, remember to
switch on the EDIT function of
another VCR if another VCR
has one.
«
If your playback VCR is a
monaural unit, connect the white
plug to LINE IN 2 AUDIO L on
this VCR. This lets you record
the sound of the playback
VCR on both channels of this
VCR. Do not connect any plug
to LINE IN 2 AUDIO R.
+
When you use the VIDEO IN
jack and S VIDEO IN
connector at the same time,
the S VIDEO IN connector
takes priority.
Editing from Another VCR
Here's how to edit from another VCR (such as an 8mm video camera recorder or
a VHS-format VCR for playback) when using this VCR for recording.
You can use the jacks located on the front panel or rear panel to perform this
operation.
Connections
When using the rear panel jacks
This VCR (Recorder)
Qeo
MONITOR OUT
LINE IN 1
VIDEO
AUDIO L
AUDIO R
(Yellow)
-
(white)
VIDEO OUT _ (Yellow 4 4
Red)
AUDIO L QUT (White) @&
AUDIO R OUT (Red)
&
Supplied audio/video cable
—
c*. 'Signal flow
When using the front panel jacks
Another VCR (Player)
This VCR (Recorder)
LINE IN 2
VIDEO
(Yellow)
AUDIO L (White)
VIDEO OUT _] (Yellow)
AUDIO R (Red)
AUDIO L OUT | (White)
AUDIO R OUT | (Red)
Supplied audio/video cable
oc, : Signal flow
Tape Dubbing
61
Advertisement
Table of Contents
