Table of Contents
Advertisement
Using the SET UP MENU
Before using the VCR, set options in the SET UP MENU display to your preferred
position.
Before you begin
*
Use @ and ¥ to move the cursor (>).
+
Use < and P to select the items.
*
To quit setting in the middle of the procedures, press MENU.
1 Press MENU.
MENU
The main MENU appears.
> SETUP MENU
PICTURE ADJUST
TUNER PAESE)
2 Press A or W to move the cursor (>) to SET UP MENU.
Use 4 ¥ to select an
lem, then push EXECUTE
3 Press EXECUTE.
The SET UP MENU appears.
4 Press a or V to move the cursor (») tothe menu choice
[aru
you want (see "Mene Choices" below).
PLANCMODE
Mg
Next, press < or B to move the dot (*) to select your
AUTQANT SEL "AUTO. MAN
desired mode setting.
DATACODE
ON
OFF
Use 4 ¥ to select an
fem, then push <p
5 Press EXECUTE to return to the original screen.
The settings are stored unless the power plug is
disconnected.
Menu Choices
LANC MODE
If you control another VCR using the synchronized editing function of this VCR, set
to M.
Set to S in a case except above-mentioned. (For details, see page 70.)
SHUTTLE MODE
+ When you perform synchronized editing on a playback VCR without the reverse
slow playback function, such as CCD-TR series and EV-S550, set toA.
* When you perform synchronized editing on a playback VCR with the reverse
slow playback function such as CCD-V701/V801
and EV-S900, set to B.
(For details, see page 70.)
AUTO STEREO
If a stereo program's reception is poor, set to MONO. The program is recorded in
monaural but the sound quality may improve. (For details, see page 36.)
28
Using the SET UP MENU
Advertisement
Table of Contents
