Table of Contents
Advertisement
Timer-Activated Recording
Note
The tape counter will return to
"OHOOMCOS" when the timer
recording starts. (If you have
multiple timer settings, the
counter will reset to "OHOOMOOS"
when the first program starts.)
The timer recording function lets you preset your VCR to record up to six programs
within a one-month period. Perform this procedure using the Remote Commander
and transmit the preset data to the VCR.
Before you begin
¢
Make sure that the time and date clock is set correctly (see "Setting the Time and
Date" on page 24.)
*
Make sure that the cassette is long enough to record all the programs.
¢
Make sure that the safety tab of the cassette has not been slid out. If you insert a
cassette with the safety tab visible in red (closed) and try to set the timer, the
cassette automatically ejects from the VCR.
Setting the Timer
Example:
Record a program broadcast on channel 26 from 9:00 pm to 10:55 pm on Friday, July
10 in LP mode.
1 Open the cover of the Remote Commander.
The Remote Commander enters timer preset
mode.
Note:
Never close the cover until you finish
transmitting the program data to the VCR.
2 Press D (DAY) until 10 appears.
The day of the week (Friday) is
automatically set.
3 Press H under the TURN ON section
until 9 PM appears.
VTR | TAPE SPEED
4 Press M under the TURN ON section
:
| 3 |
cP |
until OO appears.
V iy Neen
PTVON
De
'
a
a=)
5 Press H and M under the TURN OFF
section until 10 PM 55 appears.
(Continued)
Timer-Activated Recording
37
Advertisement
Table of Contents
