Table of Contents
Advertisement
Notes:
The dubbed sound cannot be
played back on a VCR
without PCM recording or
playback functions.
The pre-recorded sound on
the PCM track will be erased
by dubbing.
Do not use a plug-in power
microphone.
During PCM audio dubbing,
black streaks appear at the
bottom of the screen and in
the center of the screen.
These streaks will not be
tecorded
on the tape.
The picture may shake or the
color may become black and
white depending on your TV.
78
Adding Audio or Narration
Before you begin
¢
Press the INPUT SELECT buttons to select LINE IN 1 or LINE IN 2.
(When connected to the rear panel, select LINE IN 1. When connected to the front
panel, select LINE IN 2).
L1 or L2 appears in the display window of the VCR.
+
Adjust the REC LEVEL control to an appropriate level while observing the peak
level meter.
*
To monitor the audio-dubbed sound, set the AUDIO MONITOR selector to PCM.
During audio dubbing, the sound recorded on the standard track is not heard.
Operation
1 Insert a cassette.
2 Play back the cassette and determine the point where you want to begin audio
dubbing. Press Il PAUSE to pause playback.
3 Press AUDIO DUB.
4 Play back the audio source and adjust the REC LEVEL control.
5 Press tl PAUSE to release pause mode.
The picture is played back and the sound is recorded.
To stop audio dubbing
Press HB STOP.
To dub sounds from the tuner of this VCR
Press the INPUT SELECT button to select the "TUNER?" indication. The other
operations are the same as the above.
Advertisement
Table of Contents
