Table of Contents
Advertisement
7 Locate the beginning of the scene to be inserted with the EDIT
SHUTTLE ring and the FRAME buttons on this VCR.
<1 (reverse) or &> (forward) indicator lights up
to show the direction.
Player's picture
"e~
4 ae
On the VCR
One press on FRAME tt» advances one frame while one press
on 41l reverses one frame.
Player's counter
For the VCR on which you have set SHUTTLE MODE "A" (see
page 70), a frame advance in the reverse direction, reverse slow
motion playback, reverse normal speed and reverse double speed
playback may not be possible. In this case, rewind the tape a little
from the scene where you want to begin editing and search for the
starting point by playing back the tape at normal speed or forward
slow motion or forward frame advance.
8 Press SYNCHRO EDIT START/PAUSE.
The pause mode of the player and the recorder is released.
Both the player and the recorder enter pause mode immediately
after the counter shown on the TV screen reads "0:00:00".
Recorder s picture
SYNCHRO EDIT
ed
On the VCR
Recorder's counter
To edit another scene
Repeat steps 3 through 8.
To stop editing
Press SYNCHRO EDIT STANDBY.
To edit without the counter function
When you've located the beginning of the scene to be inserted, press
SYNCHRO EDIT/START PAUSE to release the pause.
76
Synchronized Editing
Advertisement
Table of Contents
