Editing; Dubbing A Tape - Sony GV-D800E Operating Instructions Manual

— Editing —

Dubbing a tape

Using the A/V connecting cable
Connect your VCR to the other (recording) VCR
using the A/V connecting cable supplied with
your VCR.
(1) Insert a blank tape (or a tape you want to
record over) into the other (recording) VCR,
and insert the recorded tape into your
(playback) VCR.
(2) Set the input selector on the other (recording)
VCR to LINE. For details, refer to the
operating instructions of the other
(recording) VCR.
(3) Set the POWER switch to ON.
(4) Press H PLAY to play back the recorded
tape on your (playback) VCR.
(5) Start recording on the other (recording) VCR.
For details, refer to the operating instructions
of the other (recording) VCR.
: Signal flow/
When you have finished dubbing a
tape
Press x on both your (playback) VCR and the
other (recording) VCR.
46
S video cable (not supplied)/
S VIDEO OUT
AUDIO OUT
VIDEO OUT
A/V connecting cable (supplied)/
H
IN
S VIDEO
VIDEO
AUDIO
x