Pioneer DEH-P825R Operation Manual page 68

Using Multi-CD Players
This product can control one or more multi-CD
players, such as the PPONEER CDX-P2000, in
addition to the built-in CD player. It is possible
to connect up to four multi-CD players by
means of a multiple installation adapter such as
the Pioneer CD-P44. When two or more multi-
CD players are installed, their priorities must be
specified. Follow the multi-CD player
instructions carefully, and set the address
switches properly.
Multi-CD player operation
¢ Press the SO button or the CD/MCD button
to select the multi-CD player source.
The message "MRP" ("Multi-CD player
repeat"), the multi-CD player, disc and track
numbers, and the playback time are displayed.
Notes:
. You cannot select the Multi-CD player
source if no multi-CD player is installed or
no magazine is loaded in an installed multi-
CD player.
2. The multi-CD player may perform a
preparatory operation, such as verifying the
presence of a disc or reading disc
information, when the power is turned ON or
a new disc is selected for playback.
"READY" is displayed.
3. If the multi-CD player cannot operate pro-
perly, an error message such as "ERROR-80"
(No disc) is displayed. Refer to "CD Player
Troubleshooting" on pages 92-93.
_
switching the Multi-CD Player
* Select the multi-CD player you want to use
by pressing the Band button while watching
the multi-CD player number display.