Pioneer DEH-P825R Operation Manual page 60

Using the Built-in CD Player
* To stop CD playback, press the SO button or
CD/MCD button to select another source
(such as the multi-CD player) or turn the
source OFF.
When the built-in CD player is selected again,
playback begins at approximately the same
place (track/playing time).
Precaution:
* Inserting more than one disc at a time may
damage the built-in CD player.
* Discs left partially inserted after ejection may
incur damage or fall out.
* If a disc cannot be inserted fully or playback
fails, make sure the recorded side is down,
push the Eject button and check the disc for
damage before reinserting it.
* If a CD is inserted with the recorded side up, it
will be ejected automatically after a few
moments. If the front panel is closed before
ejection, playback will fail. Open the front
panel and push the Eject button.
* If the built-in CD player cannot operate pro-
perly, an error message (such as ERROR-14)
appears on the display. Refer to "CD Player
Troubleshooting" on pages 92-93.
60