Pioneer DEH-P825R Operation Manual page 106

06
Digital Signal Processor (DSP)
Using the Digital Attenuator
If a crackling sound occurs while the DSP is in
use, the Digital Attenuator, can be switched to
the L (no clip) level. Under normal conditions
the H (mainly S/N) settng is recommended.
Operation
a
. Press the DSP button for 2 seconds or longer
to enter the Digital Attenuator mode.
"DIG.ATT H" appears on the screen.
The display reverts to the previous indication
after 8 seconds of inactivity.
2. Use button 1 to switch "L" or "H".
3. Press the DSP button to return to the normal
display.
iN