Pioneer DEH-P825R Operation Manual page 44

44
Using RDS Functions
PI Seek function
If the tuner fails to locate a suitable alternative
frequency or the broadcasting signal is too weak
for proper reception, "PI SEEK" appears on the
display, and the tuner searches for another
frequency broadcasting the same or related
programming.
The radio volume is muted somewhat longer
during a PI Seek than normal. The muting is
discontinued after completion of the PI Seek,
whether or not the PI Seek has succeeded. If the
PI Seek is unsuccessful, the tuner returns to the
previous frequency.
PI Seek ON/OFF Switching
The default setting for PI Seek is OFF.
¢ To switch PI Seek ON, hold down button 2
while turning the ignition key from OFF
(Lock) to ON (ACC).
REG Function
When AF is used to retune the tuner
automatically, REG (regional) limits the
selection to stations broadcasting regional
programming.
Activating/Deactivating REG
The REG function can be turned ON or OFF
independently for each FM band.
To activate REG, press the AF button for 2
seconds or longer in'an FM band.
The "REG" indicator lights.
* To exit the REG mode, press the AF button
for 2 seconds or longer again.
The "REG" indicator is extinguished.
Notes:
1. Regional programming and regional networks
are organized differently depending on the
country (i.e., they may change according to
the hour, state or broadcast area).
2. The preset number may disappear on the
display if the tuner tunes in a regional station
which differs from the originally set station.