Pioneer DEH-P825R Operation Manual page 26

bh e\— al @)e\—kat- 4 om oye)
Preset Memory
The Preset Memory function stores stations in
memory manually.
1. Select the station whose frequency you want
to store in memory.
2. Press the F button to turn Function OFF.
Note: Preset stations 1-6 can be also selected
with Function ON. If F2 band or
MW/LW band is selected, switching
between Function ON and Function OFF
is not possible.
3. Press one of buttons 1-6 (F1: 1-12) for 2
seconds or longer.
The station is stored in memory under the
selected button.
4, When you have stored all the desired stations
in memory, press the F button again to turn
Function ON.
Recalling Preset Stations
There are 2 ways to recall preset stations.
Remote Controller:
¢ Press the (A) or (VW) button to recall a station
preset under buttons 1-6 (F1: 1-12).
26