Pioneer DEH-P825R Operation Manual page 48

Using RDS Functions
Canceling Traffic Announcements
¢ Press the TA button while a traffic
announcement is being received to cancel the
announcement and return to the original
source.
The announcement is canceled but the tuner
remains in the TA mode until the TA button is
pressed again.
Adjusting the TA Volume
When a traffic announcement begins, the
volume adjusts automatically to a preset level to
enable you to hear the announcement clearly.
¢ Inthe TA mode, the equalizer curve is for TA
use. Nuance Control is available for this
equalizer curve.
¢ SFC is switched OFF.
¢ Using the (+) or (—) buttons to set the volume
by adjusting it during traffic announcement
reception.
The newly set volume is stored in memory and
recalled for subsequent traffic announcements.
Notes:
1. Cellular muting is activated for calls received
during traffic announcement reception.
2. Attenuation is canceled if a traffic
announcement is received in the Attenuation
mode.
TP Alarm function
About 30 seconds after the "TP" or "EON"
indicator is extinguished due to a weak signal, a
5-second beep sounds to remind you to select
another station.
¢ If you are listening to the tuner, tune in
another TP station.
In the built-in CD player or multi-CD player
mode, the tuner automatically seeks out the TP
station with the strongest signal in the current
area 10 seconds after TP disappears from the
display.