universalblue MARMARA User Manual page 50

dispenser is full, you will see a black dot. As the dispenser empties, the black dot
will disappear.

As the rinse aid decreases, the size of the dark spot decreases, as shown below.
Never allow the rinse aid to empty below 1/4.
To refill the rinse aid reservoir, follow these steps:
1. Open the dispenser by turning the lid to the left and remove it.
2. Add the rinse aid into the dispenser taking care not to overload it, as this may cause
foam. The volume of the rinse aid container is about 140 ml.
3. Replace the cover by aligning it with the "open" arrow and turning it clockwise.
4. Wipe up any spills with a damp cloth.
The rinse aid is released during the last rinse to prevent water droplets from forming on
the dishes, preventing stains or scratches on the dishes. It also contributes to improved
drying.
Your dishwasher is designed to use liquid rinse aid. The rinse aid dispenser is located
inside the door next to the detergent dispenser.
Adjusting the rinse aid dispenser
50