universalblue MARMARA User Manual page 49

1. Remove the bottom tray, then unscrew and remove the lid from the salt container.
2. If it is the first time you fill the container, fill 2/3 of its volume with water (about 500
ml).
3. Place the end of the funnel (supplied) in the hole and insert approximately 1.2 kg of
salt. It is normal for a small amount of water to flow out of the salt container.
4. Carefully retighten the cover.
5. Generally, the salt warning light will turn off in 2-6 days after the salt container has
been filled.
After the first wash cycle, the control panel light turns off.
NOTES:

The salt tank must be refilled when the salt warning light on the control panel
illuminates. Even if the salt container is full enough, the indicator light may not
switch off until the salt has dissolved completely.
 If there are salt spills, a pre-wash program can be run to remove them.
FILL THE DISPENSER WITH RINSE AID
The rinse aid is automatically added during the last rinse, ensuring a complete rinse, free
of stains and scratches on your dishes.
Attention!
Only use branded rinse aid for the dishwasher. Never fill the rinse aid dispenser
with any other cleaning agent (e.g. dishwasher detergent or liquid detergent). This
could damage the device.
When to refill the rinse aid dispenser:
 If there is no rinse aid warning light on the control panel, you can judge the amount
of rinse aid by the color of the optical level indicator "D" next to the cover. If the
49