Installation - Pentair LINCOLN L Series Owner's Manual

INSTALLATION
The typical installation and pump
mountings, shown are only a guide for
selecting and installing system compo-
nents. Contact your Lincoln Represent-
ative for assistance in designing a
system to suit your particular needs.
Mount the pump to suit the type of
installation planned. Refer to the pump
dimensional drawing for mounting
layout.
An air line filter/regulator/lubricator
is recommended for use with your
Lincoln pump to remove harmful dirt
and moisture from your compressed air
supply, and to provide automatic air
motor lubrication.
Be sure all air and fluid hoses are
properly sized for your system.
LINCOLN
®
TIGHTEN all fluid connections securely before
using this equipment.
TYPICAL PUMP MOUNTINGS
Note: When pumping from bulk tanks use 82439 Low
Level Cut-Off to maintain prime and prevent air
from being pumped through meters when tank is
empty. Refer to Service Page K1-1.
MODEL 82398
*REFER TO SEPARATE INSTRUCTIONS:
SECTION G9, PAGE 2 SERIES.
3
Form 403077