Double Insulated Tools; Polarized Plugs; Extension Cords - Bosch GTS15-10 Operating/Safety Instructions Manual

Table of Contents

Available languages

Double insulation

electric power tools which eliminates the need for

the three wire grounded power cord and grounded

power supply system. It is a recognized and ap-

proved system by Underwriter's Laboratories, CSA

and Federal OSHA authorities.

IMPORTANT: Servicing of a tool with double insu-

lation requires care and knowledge of the system

and should be performed only by a qualified ser-

vice technician.

WHEN SERVICING, USE ONLY IDENTICAL RE-

PLACEMENT PARTS.

Polarized Plugs

To reduce the risk of electrical shock, your tool is

equipped with a polarized plug (one blade is wider

than the other), this plug will fit in a polarized out-

let only one way. If the plug does not fit fully in

the outlet, reverse the plug. If it still does not fit,

contact a qualified electrician to install the proper

outlet. To reduce the risk of electrical shock, do

not change the plug in any way.

Extension Cords

Replace damaged cords immediately. Use of dam-

aged cords can shock, burn or electrocute.

If an extension cord is necessary, a cord with ade-

quate size conductors should be used to prevent ex-

cessive voltage drop, loss of power or overheating.

The table shows the correct size to use, depending

on cord length and nameplate amperage rating of

tool. If in doubt, use the next heavier gauge. Always

use U.L. and CSA listed extension cords.

1609B07947_GTS15-10_Table_Saw_OSI_20230420.indd 10