Advertisement
Using the OSD buttons controls an on-screen graphical user interface which displays on top of your input video, allowing intuitive adjustment of the following
display parameters:
Parameter
Available Adjustment
Increase/decrease monitor brightness.
Brightness
Default: maximum
Increase/decrease monitor contrast.
Contrast
Default: best gray-shade performance
Allow fine adjustments of the panel's pixel dot clock.
Clock
Only applicable for VGA input video
Allow fine adjustments of the panel's pixel dot clock phase.
Phase
Only applicable for VGA input video
Automatically adjusts the system clock to the input analog VGA video signal, affecting the H-position, V-position, Clock, and Phase menu items.
Auto Adjust
Only applicable for VGA input video
Move the image horizontally on the display in single-pixel increments.
H-position
Default: centered
Only applicable for VGA input video
Move the image vertically on the display in single-pixel increments.
V-position
Default: centered
Only applicable for VGA input video
Switch the scaling method between Full Scaling and Maintain Aspect Ratio. Default:
Full Scaling
Full Scaling – scale the X- and Y-dimensions of the input video (up or down as needed) to the display's native resolution.
Aspect Ratio
Fill To Aspect Ratio – Assuming a landscape orientation and an input video with aspect ratio smaller than 16:9, scale the Y-dimension of the input video (up or down
as needed) to the display's Y-resolution, and scale the X-dimension to maintain the input video's aspect ratio (and fills the rest of the display with equal black bars on
the left and right).
Other touchscreen technologies may need recalibration when switching between Aspect Ratio options.
*this function is available only on wide monitors.
Adjust sharpness of the displayed images.
Sharpness
Default: no sharpness adjustment
Only applicable at non-native input video resolutions.
Select the display's color temperature. The available color temperatures are 9300K, 7500K, 6500K, 5500K, and User Defined. If the User Defined
Color Temperature
option is selected, the user can change the color temperature by changing individual R, G, and B gains on a scale from 0 to 100. Default: User Defined
with R, G, and B all set to 100.
User Manual: 90 Series RevB
UM600129 Rev E, page 12 of 28
Advertisement
