Advertisement
Projected Capacitive Touch Technology
When connected to Windows
7,
When connected to Windows XP computers, the touchscreen display reports single touch.
No additional drivers are required for this technology to work with Windows 7, 8.1 and 10 or later, it uses Windows HID drivers.
Refer to Chapter 2, Section "Installing the Touch Technology Software Drivers" to find instructions to download touch drivers for
Windows XP.
Gesture Support
The IntelliTouch Dual Touch technology enables several gestures that support single and multiple touches. Refer to the
Microsoft Website http://msdn.microsoft.com/en-us/library/dd940543 on the various gestures that are supported in Windows 7.
Video
A display's native resolution is its width and height measured in number of pixels. Generally, for best performance, an image
IntelliTouch Dual Touch Technology
When connected to Windows 7, 8.1 and 10 or later computers, the touchscreen display can
report 2 simultaneous touches. When connected to Windows XP computers, the touchscreen
display reports single touch.
The IntelliTouch Dual Touch touchscreen can be re-calibrated to your displayed video
image, if needed, through the calibration function in the Elo driver control panel.
The IntelliTouch Dual Touch driver will only support multiple monitors if
they are all using the IntelliTouch Dual Touch technology.
To use multiple IntelliTouch Dual Touch monitors, double click on the
EloConfig desktop shortcut to open up the Elo Touch Configuration
screen
Select "Match Touch to Display..." to calibrate multiple monitors.
8.1 and 10 or later computers, the touchscreen display can report 10 simultaneous touches.
User Manual: 90 Series RevB
UM600129 Rev E, page 10 of 28
Advertisement
