Appendix B: Module Specifications - Crestron GREEN LIGHT Power Switching Installation Manual

CRESTRON GREEN LIGHT™

Appendix B: Module Specifications

Specifications for the GLXP modules are listed in the following table.
GLXP Module Specifications
SPECIFICATION GLXP-SW10
Description
Switch Module
Number of Outputs
Cresnet Power
Usage*
Input Voltage 100 – 277 VAC
Supported Load Incandescent,
Types Magnetic Low
Voltage,
Electronic Low
Voltage,
Neon/Cold
Cathode,
Fluorescent
Ballast, HID,
Motor
Maximum Load
Lighting 16 A per output
Motor
2 HP @ 230/277V
Environmental
Temperature
Humidity 10% to 90% RH
(non-condensing)
Heat Dissipation
* Power usage will be zero whenever AC power is present on circuit 1 on the module. Use of Cresnet power is optional.
Installation Guide – DOC. 6672B
GLXP-SW16
10 Channel 16 Channel
Switch Module
10
5 Watts 5 Watts
100 – 277 VAC
50/60 Hz 50/60 Hz
Incandescent,
Magnetic Low
Voltage,
Electronic Low
Voltage,
Neon/Cold
Cathode,
Fluorescent
Ballast, HID,
Motor
16 A per output
1 HP @ 120V 1 HP @ 120V
2 HP @ 230/277V
32º to 104º F 32º to 104º F
(0º to 40º C) (0º to 40º C)
10% to 90% RH
(non-condensing)
10 BTU/Hr 10 BTU/Hr
GLXP-HSW8
8 Channel High-
Inrush Switch
Module
16 8
5 Watts
100 – 277 VAC
50/60 Hz
Incandescent,
Magnetic Low
Voltage,
Electronic Low
Voltage,
Neon/Cold
Cathode,
Fluorescent
Ballast, HID,
Motor
16 A per output
½ HP @ 120V
1 HP @ 230V,
1 HP @ 277V
32º to 104º F
(0º to 40º C)
10% to 90% RH
(non-condensing)
10 BTU/Hr
CRESTRON GREEN LIGHT Power Switching • 15
Power Switching
GLXP-HSW12 GLXP-DIMFLV8
12 Channel High- 8 Channel 0-10V
Inrush Switch Fluorescent
Module Dimmer Module
12
5 Watts 5 Watts
100 – 277 VAC 100 – 277 VAC
50/60 Hz 50/60 Hz
Incandescent, Dimmable
Magnetic Low Loads:
Voltage, 0-10 VDC
Electronic Low dimmable
Voltage, fluorescent
Neon/Cold ballasts (i.e.
Cathode, Advance Mark 7
Fluorescent or other ballasts
Ballast, HID, that comply with
Motor the specifications
for control by DC
voltage in ANSI
C82.11:2002 and
IEC60929:2006)
Non-Dim Loads:
Incandescent,
HID, magnetic low
voltage (MLV),
electronic low
voltage (ELV),
neon/cold
cathode, and
fluorescent
ballasts, motor
16 A per output 16 A per output
½ HP @ 120V ½ HP @ 120V
1 HP @ 230V, 1 HP @ 230V,
1 HP @ 277V 1 HP @ 277V
32º to 104º F 32º to 104º F
(0º to 40º C) (0º to 40º C)
10% to 90% RH 10% to 90% RH
(non-condensing) (non-condensing)
10 BTU/Hr 10 BTU/Hr
8