Accessories and Transceivers
Table 1-1
Enterasys Networks.
Table 1-1 WS-AP3765 Accessories List
Accessory
Power Module
Mounting Bracket Set
Lightning Protector
Table 1-2
transceivers can be ordered from Enterasys Networks. Supported transceiver models are also
listed in the data sheet at:
http://www.enterasys .com/products/transceivers-ds.pdf
Table 1-2 Pluggable Transceivers Supported for the WS-AP3767e
Part Number
I-MGBIC-GLX
I-MGBIC-LC03
I-MGBIC-GSX
For a list of certified external antennas, see
For a list of valid cables and connectors, see
on page 3-4.
Access Point LEDs
WS-AP3765 LEDs
The WS-AP3765 frontal view of the housing cover displays six LEDs. These LEDs provide
information on operating status. For more information, see the Enterasys Wireless Convergence
Software User Guide.
lists accessories for the WS-AP3765 and WS-AP3767e. You can order these products from
Description
Power Supply Adapter
Input: 100-240V AC
Output: 24V DC
Wall mounting bracket specifically for the
WS-AP3765 and WS-AP3767e
Lightning protector N/N female/female
lists the industrial pluggable transceivers that can be used with the WS-AP3767e. These
Description
-40°C to +60°C, 1 Gb, 1000BASE-LX, MM - 550 m, SM - 10 km,
1310 nm Long Wave Length, LC SFP
-40°C to +60°C, 1 Gb, 1000BASE-LX, MM, 1310 nm, 2 km with
62.5 MMF, 1 km with 50 MMF, LC SFP
-40°C to +60°C, 1 Gb, 1000BASE-SX, IEEE 802.3 MM, 850 nm
Short Wave Length, 220/550 m, LC SFP
"External
Antennas" on page 4-4.
"WS-AP3765 / WS-AP3767e Cables and
Enterasys Wireless Outdoor Access Points Installation Guide 1-3
Accessories and Transceivers
Enterasys Part Number
WS-PS376X-MR
(Identical with Siemens part
number PS791-2AC)
WS-MB376X-01
WS-CAB-LPM
Connectors"