Table of Contents
Advertisement
This chapter introduces the WS-AP3765i, WS-AP3765e, and WS-AP3767e outdoor access points.
For information about...
Product Overview
Package Contents
Accessories and Transceivers
Access Point LEDs
Reset Button
Product Overview
The Enterasys Wireless Outdoor WS-AP3765i, WS-AP3765e, and WS-AP3767e access points
enable you to extend your Wireless LAN beyond the boundaries of indoor locations. They are
resistant to harsh outdoor conditions and extreme temperatures. Using the advanced wireless
distribution feature of the Enterasys Wireless LAN, the WS-AP3765i, WS-AP3765e, and
WS-AP3767e access points can extend your Wireless LAN to outdoor locations without Ethernet
cabling. A mounting bracket is available to enable quick and easy mounting of the access points to
walls, rails, and poles.
The WS-AP3765 and WS-AP3767e models have two radios that support the 802.11n standard, and
have full backward compatibility with legacy 802.11a/b/g devices. WS-AP3765 is available in two
versions: — one with internal antennas only (AP3765i), and one with support for external
antennas (AP3765e). The WS-AP3767e also provides support for external antennas. Both the
WS-AP3765e and WS-AP3767e with external antenna connectors support a variety of antennas,
providing range and coverage versatility.
The WS-AP3765i, WS-AP3765e, and WS-AP3767e inter-operate fully with the Enterasys Wireless
LAN, including support for Enterasys VoWLAN, branch office mode, availability and mobility
features.
The WS-AP3765 models provide one Ethernet RJ45 connector for LAN connectivity.
The WS-AP3767e provides two SFP fiber transceiver sockets for LAN connectivity. The AP uses
one transceiver to connect upstream to the access controller and the local LAN. The second
transceiver is optional and used only if the optical network has to be extended downstream from
the AP.
Enterasys Wireless Outdoor Access Points Installation Guide 1-1
1
Introduction
Refer to page...
1-1
1-2
1-3
1-3
1-5
Advertisement
Table of Contents
