Operating Mode; Dig/Analog; Name; Tone Mode - Yaesu ADMS-16 Instruction Manual

• Operating Mode

Select the operating mode for receive channel.
FM: The selected frequency band is set to FM mode.
AM: The selected frequency band is set to AM mode.

• DIG/ANALOG

The AMS, V/D mode (DN), the Voice FR mode (VW) and the ANALOG mode (FM/AM mode) are select-
able.
When the Setup Menu [14 DIGITAL VW] is set to "ON", the Voice FR mode (VW) can be selected.

• Name

Enter the desired memory name (up to 16 digits).

• Tone Mode

This item selects the Audio Squelch Code type.

• CTCSS Frequency

This item selects the Tone Frequency of the Tone Squelch.

• DCS Code

Select the DCS code when DCS is set.

• User CTCSS

Select the idle line frequency to remove signals such as idle line signals used by private railways and con-
trol signals of MCA radio system.

• RX DG-ID

Select the receiving DG-ID number.

• TX DG-ID

Select the transmitting DG-ID number

• Tx Power

This item selects the TX Power.

• Step

Sets the channel step for receiving channels. Normally, when a frequency is entered, the optimal channel
step will be automatically set according to the frequency.

• Narrow

By ticking the checkbox of this item, switches to the Narrow FM mode. The degree of modulation becomes
half the normal level.
31