Configure The Wireless Bridge - Danfoss ECL Comfort 296 Operating Manual

Operating guide
3.2 Wireless internet router
This is a standard wireless internet router which may already be avail-
able in the building providing a wireless internet connection.
To connect to the wireless internet the name of the wireless network
(SSID) and the password must be known.
3.3 Wireless bridge
The wireless bridge is the extra electronic device needed to make
the ECL Comfort 296 / 310 able to connect to the wireless internet
connection.
Several wireless bridges are available on the market, but the one
from Netgear (type WN3000RP) shown in the picture is very simple
to install and configure.
The wireless bridge is inserted into the mains plug and a standard
network cable is connected from the side of the wireless bridge to
the ECL Comfort 296 / 310 ethernet connection.
3.4 Configure the wireless bridge
Prior to connecting the wireless bridge to the ECL Comfort 296 /
310 it has to be configured by following the Netgear wizard.
The Netgear wizard is accessed by connecting a computer to the
ethernet connector of the wireless bridge, opening an internet
browser and entering www.mywifiext.net in the address field.
AQ070386470176en-010301
ECL 296 / 310 Comfort to WLAN
Netgear (type WN3000RP).
Select the wireless network to be used by the ECL Comfort 296 / 310 in the
Netgear Wizard.
© Danfoss | 2021.01 | 3