Configuring The Ip Address; Configure Iot Settings - Danfoss VLT MCD 201 Installation Manual

EtherNet/IP Module
Installation Guide

5.3.3 Configuring the IP Address

1
2
Procedure
1.
Connect to the web server and click IP Setting.
2. Edit settings as required. To enable DHCP addressing, tick the DHCP checkbox.
3.
Click Submit to send the new settings to the device.

5.3.4 Configure IoT Settings

The EtherNet/IP module supports soft starter status monitoring via IoT. The device cannot control or program the soft starter.
16 | Danfoss A/S © 2022.10
3
Device Configuration
AN427641276310en-000101 / 175R1187