Table of Contents
Advertisement
Playback
n Contents
Turning the power on
Selecting the input source
Adjusting the volume
Turning off the sound temporarily (Muting)
Adjusting the volume balance (LEVEL) and sound quality
(BASS/TREBLE)
Switching the display's brightness
Having the illumination lamp off
Playing CDs
Recording
X
REMOTE MODE AMP
uio p
ENTER
DISPLAY
MODE/TRIM
TONE
INPUT df
VOLUME df
MUTE
Turning the power on
16
1
16
Press X on the main unit to turn the power on.
16
The power indicator lights in blue.
0
16
Press X AMP on the remote control unit to turn on power
17
0
from standby mode.
18
You can also turn the INPUT SELECTOR on the main unit
0
18
when the unit is in standby mode to turn on the power.
18
n Switching the power to standby
18
1
Press X AMP on the remote control.
The unit switches to standby mode, and the STANDBY
AMP
indicator lights red.
NOTE
Power continues to be supplied to some of the circuitry
0
even when the power is in the standby mode. When
leaving home for long periods of time or when going on
vacation, either press X on the main unit to turn off the
power, or unplug the power cord from the power outlet.
Selecting the input source
1
Use INPUT df to select the input source to be
played back.
The selected input source appears on the display.
You can also select the input source by turning INPUT
0
SELECTOR on the main unit.
Adjusting the volume
1
Use VOLUME df to adjust the volume.
You can also adjust the volume by turning VOLUME on the
0
main unit.
Turning off the sound temporarily
(Muting)
1
Press MUTE.
"MUTE" appears on the display and the sound is
muted.
To cancel mute, press MUTE again.
0
You can set the volume to be decreased when MUTE is
0
pressed. Set this as desired through "ATT LEVEL" in the
menu. (v p. 20)
ENGLISH
16
Advertisement
Table of Contents
