Advantech EKI-7629C User Manual page 17

Chapter 2
In this chapter, you will be given an overview of the EKI-7629C/CI hardware installation
procedures.
2.1 LED Indicators
There are few LEDs display the power status and network status located on the front
panel of EKI-7629C/CI, each of them has its own specific meaning as the table below.
Table 2.1: EKI-2525PA LED Definition
LED Color
PWR1 Green
PWR2 Green
P-Fail Red
Link/Active
Green
(G9, G10 with
SFP)
Link/Active
(G9, G10 with Green
copper)
Green
Link/Active
(1~8)
Yellow
Duplex/Collision
(1~8)
Installation
Description
On Power input 1 is active
Off Power input 1 is inactive
On Power input 2 is active
Off Power input 2 is inactive
On Power input 1 or 2 is inactive
Off Power input 1 and 2 are both active, or no power input
On SFP port is linking
Flashing Data is transmitting or receiving
Off Not connected to network
On Connected to 1000 Mbps network
Flashing Data is transmitting or receiving
Off Not connected to 1000 Mbps network
On Connected to network
Flashing Networking is active
Off Not connected to network
On Ethernet port full duplex
Flashing Collision of packets occurs
Off Ethernet port half duplex or not connect to network
9 Chapter2