Download Print this page

Singer CARDMATIC-313 Instructions Manual page 74

Advertisement

(6)
@)
(8)
(2)
(10)
ql)
Knit 6 rows Increasing one stitch every second row
three times on both sides.
Now 116 stitches are
on the machine.
Knit 58 rows without increasing or decresing.
Retain 35 needles from the carriage side (left-hand
side) for the shoulder at B position and pull out
all of the other needles to D position.
Set Russel
lever to CENTER and knit 4 rows with 35 needles
at B position for the left shouder.
Cut the yarn,
leaving approximately
six times
the
width of shoulder.
Knit several
rows of scrap yarn.
Remove
the 35 stitches from the machine.
Push
back the empty needles
to A position.
Push
back the 35 needles
at the opposite
side
(right-hand side) into C position leaving 46 stitches
for Neck Opening in D position.
Knit 4 rows and
remove from the machine in the same manner
as
the other shoulder. (Refer to paragraph 9.)
Push
back the remaining 46 needles
from D posi.
tion to C position.
Knit several
rows with scrap
yarn and remove from the machine.
:
t
{
\
\
\
\
\
\
:
t
t
— 68 —
(b) Front of sweater
(12) Repeat operation 1~6.
(13) Knit 40 rows without increasing or decreasing.
(14) Retain
the 35 needles
for the shoulder
at the
carriage side (left hand side) at B position.
Pull
out all of the other needles to D position.
Set
Russel lever to CENTER and knit 22 rows with the
35 needles at B position.
(15) Cut the yarn, leaving 2~2%
in. Knit several rows
with scrap yarn and remove from the machine
Push back empty needles to A position.
(16) Push back the 35 needles at opposite side (right
hand side) into C position.
Set the side lever to
YY, and knit 22 rows.
Knit sevsral rows with waste
yarn and remove from the machine.
(Same as the
paragraph
15.)
(17) Push
back
all of the other 46 neeedles
at the
center of the needle
bed into C position.
Knit
several
rows of scrap
yarn
and
remove
from
the
machine.

Advertisement

loading