Advertisement
(3) Transfer the stitch on the tool onto the adjacent
needle, following the instructions on the chart.
(1) Knit two rows of stockinet stitches.
Use the transfer
tool to pull the needle in the position marked with
0 in the pattern chart out to the D position.
TM
WIT
PATTEM
ITM TM ITI
WIT WIT WIT WT
(2) Push the needle back to its former position and the
(4) Repeat the procedures 1 through 3, knitting two
stitch will slide over the latch onto the transfer tool.
rows
between
each
decrease
and
pulling
empty
needles back to the B position to knit again.
—42—
Advertisement
