Advertisement
KNiT=IN 10°
E
ont th)
——$P
(1) Insert
the punched
card
No.15-A
in the pattern
panel.
Set the carriage, following
instructions for
the upper = mark. (KNIT-IN
1)
(2) Knit one row in the direction of the arrow with the
yarn coming through the yarn feeder.
One row of
stockinet stitches has been knitted and the nee-
dies line up in the C position.
| Oxnit=in 29
T
Center (Blue)
————
(3) Set the carriage, following the instructions for the
0 mark colum. (Cam lever is set at KNIT-IN 2.)
(4) Now you are ready to knit Fair Isle patterns,
Before
you
knit
the
second
row,
first stop
the
carriage at 1 or 2 inches from the edge of the
garment.
Remove
the contrasting yarn from the
yarn hook at one end of the needle bed, and hook
it to the yarn holder at the proceeding side of the
carriage.
(5) Knit one row,
which
is the first row of your Fair
Isle pattern in two colors.
The latch needles will
line up in C position after knitting.
(€) While you are moving the carriage toward the end
of needle
bed (Do not go too far away.)
remove
the yarn from the yarn holder by pulling it toward
you in the motion as if you drew a circle.
Now.
bring back the carriage toward the garment,
hook the yarn to the yarn holder same as explained
in 4, to knit the second row.
A
(7) Continue knitting,
changing the hooking of contra-
sting color each time, until STOP
sign appears
in
the pattern panel window and you hear the Buzzer.
(8) Return the card from STOP to the = mark by turn-
ing the feed dial backward,
(9) Knit one row, following instructions for the == mark
indicated by a red arrow.
(10) Repeat the instructions from 0 to STOP
and back
to the =
mark pointed by a red arrow.
* The weights holding the knitted piece downward must
be moved upward as the knitting operation progresses.
!
|
Advertisement
