Advertisement
* Care should be taken not to make a knot in the ravel-
ling cord.
(8) While you are pulling the ravelling cord tight with
your 'left hand, gently move the carriage back and
* Tie an end of the ravelling cord to the accessory
forth to knit six rows.
(The carriage must be on
o v e r
f i
the left side of the needle bed at the end of this
brush, Coassing It:through'a hole-en "the 'holder: of the
(9) Remove
the ravelling cord from the yarn hook and
pull it out from the left hand side. Now the casting
on procedure has been completed.
—A2 =
Advertisement
