Advertisement
* How to Attach STOP Buzzer
* Set STOP Buzzer on top of Pattern Panel as illus-
trated above.
Note:
Do not try to remove STOP Buzzer while Pun-
ched Card is in.
STOP
The STOP
sign appearing in the pattern
panel window
indicates the end of the card. As soon as you hear the
Buzzer, stop knitting and rewind
the card
back to =
mark.
When
the knitting operation is finished by using
the card only once, knit a row at the = mark position to
complete the pattern. If the knitting is to be continued
further, start again from the ==
mark.
S—_
~~
a
PATTERN
ROWS INDICATED ON THE CARD
On the right-hand side of each punched
card there are
numbers indicating the number of rows of the pattern,
and they appear in the pattern panel window
at each
row.
ee e080
r\
= MARK
The
==
mark
that precedes the 0 mark
indicates the
position where the punched card is to be set.
When the card is used repeatedly,
it must be set back
to this position before knitting operation is continued.
Advertisement
