Download Print this page

Singer CARDMATIC-313 Instructions Manual page 44

Advertisement

2. Correcting Pattern Stitches
»* Rip out as many
rows as needed
to repair knitted
piece. (In the case of Fair Isle undo the fabric after
the needles have been lined up in the B position.)
»* Turn the punched
card and the row counter back
by the number of rows unravelled.
»* If the
stop konb and
the
carriage
are
set
as
instructed below, the carriage will be moved across
the needle bed without knitting and memorize
the
pattern to be knitted
when the carriage is moved
next.
When
Knitting Yarn
Is in the Opposite
Side of
Carriage
Pattern knitting other
than knit-in
Knit-in
(1) Stop knob.
Cam lever.
lip
Side lever......
(@) in the
direction of carriage movement
Row counter lever......... Turned
aside
fe)
(1) Stop knob.
Cam lever
Side lever...
sides
Row counter lever......... Turned
aside
<
Set the cam lever as shown
'above and return carriage to
the side of yarn.
(2) Reset stop knob to W and car-
riage controls to their former
positions and knit on.
|_Oxwir=in 20
Set cam lever as above and re-
turn carriage to the side of yarn
(needles will be back in C po:
sition),
(2) Set stop knob to W, turn row
counter lever crosswise and knit
on,

Advertisement

loading