Advertisement
CARRIAGE
Stitch Dial
This dial is used for controlling the size of stitches.
'A wide variety of yarns from very fine yearns to bulky yarns can be used.
[Side Lever
© and ¥ marks are given.
The side lever on both sides are set to either of these marks accord:
ing to the type of knitting as given below.
'© mark: Stockinet, Knitin or when no needle selection is desired
'Y mark: Tuck knitting, Tuck slip stitches, Weaving,
Cam Lever
Set this cam lever to a desired pattern, which is knitted
automatically by simply moving the carriage back and forth,
Row Counter Lever
Handle
|] tever for advancing
The handle can be folded readily and it gets ready for
the row counter.
use only by erecting it, very easy to pack away
Russel Lever
Center.
(Blue) appears in the indicator. Needles in B
is installed inside
and C positions knit the yarn while those
neces
\
which have been brought into D position re:
main idle.
Right.
(Red) appears in the indicator. This position is
used only when the needles in D position are
'also desired to knit.
Indicator
(Blue) oF (Red) appears in the window when the russel
lever is operated.
'Arm Nut
i
'Arm
¢
I the arm is removed, the front of the carriage can be
lifted up to be moved freely,
Yarn Holder
This is used for hooking a secondary yarn or weaving
yarn in Knitin and weaving,
Auxiliary arm Insertion Slot
Can be opened and closed at Aus
Yarn Feeder
(RNITAN' WEAVE)
will so that the changing ot «it This nut is tightened to lock
Can be used for Two
ferent-secondary yarns can be the accessory auxiliary arm.
Thread knitting, too
done easily
% STOP Buzzer is used when pattern stitches are
worked by setting it up on top of the Pattern
Panel.
+ STOP Buzzer is operated by a UM—3 Dry Cell.
How to Place an electhic battery.
(1)Place the electric
battery inside the
hole at the bot
tom of the STOP
wa
Buzzer
as. illus-
g
g
trated.
%* You may put it
in either way.
(2)Push in the bat-
tery as far as it
will go.
(3)When
you
want
to
remove
it,
first press down
at one
end
as
illustrated.
Advertisement
