Delivery Access - Endless Pools R200 Pre-Delivery Instructions

DELIVERY ACCESS

It may be necessary to remove a gate, part of a fence, or other movable obstructions in order to move the system to its
installation site. Your system will determine what equipment is necessary to move your system to its final location. A roll back truck
with a tilt bed is a good option if your site can be accessed by an across road vehicle. When a small reach is needed for the final
placement of your system, a boom truck is ideal. A telehandler vehicle can off load, traverse property and place your system in a
more challenging situation or terrain. When access to your site is limited a crane may be used to lift your system over obstructions
for precise placement.
In most cases, the ENDLESS POOLS delivery personnel will supervise the crane delivery and complete the system
installation. Contact your sales associate for further information. NOTE: If your system delivery requires the use of a crane,
you may be required to pay for its services at the completion of the delivery.
Model
R200 / R220
R500 / X500
E500
E550
E700
E2000 / X2000
How is your width clearance?
Check all gates
Protruding electric meters
Gas meters
A/C units
Do you have su cient
overhead clearance?
Check low roof eaves,
overhanging branches,
rain gutters
Is the path clear?
Move away branches, dog
houses, rewood, etc.
If there is a 90 turn, can we
clear it? (The system will not bend)
Width W Length L
7'5"
7'5"
7'5"
7'10"
7'5"
7'5"
BACK YARD
Page 3
Height H
12'0"
15'0"
15'0"
15'0"
17'0"
20'0"
HOUSE
STREET
VIEW LOOKING DOWN
50"
50"
58"
58"
58"
58"