System Options; Security - Axis Q6000-E Mk II User Manual

AXIS Q6000-E Mk II PTZ Network Camera

System options

System options

Security

Users
User access control is enabled by default and can be configured under System Options > Security > Users. An administrator can
set up other users by giving them user names and passwords. It is also possible to allow anonymous viewer login, which means
that anybody may access the Live View page.
User access control is enabled by default and can be configured under Setup > Additional Controller Configuration > System
Options > Security > Users. An administrator can set up other users by giving them user names and passwords.
User access control is enabled by default and can be configured under Preferences > Additional Device Configuration > System
Options > Security > Users. An administrator can set up other users by giving them user names and passwords.
The user list displays authorized users and user groups (access levels):
• Viewers have access to the Live View page
• Operators have access to all settings except:
- creating and modifying PTZ presets
- creating and modifying PTZ control settings
- creating and modifying privacy mask settings
- uploading applications and language files
- any of the settings included in the System Options
• Administrators have unrestricted access to all settings. The administrator can add, modify and remove other users.
Note
Note that when the option Encrypted & unencrypted is selected, the webserver will encrypt the password. This is the default
option for a new unit or a unit reset to factory default settings.
Under HTTP/RTSP Password Settings, select the type of password to allow. You may need to allow unencrypted passwords if there are
viewing clients that do not support encryption, or if you upgraded the firmware and existing clients support encryption but need
to log in again and be configured to use this functionality.
Under User Settings, select the Enable anonymous viewer login option to allow anonymous users access to the Live View page.
Select the Enable anonymous PTZ control login to allow anonymous users access to the PTZ controls.
ONVIF
ONVIF is an open industry forum that provides and promotes standardized interfaces for effective interoperability of IP-based
physical security products.
By creating a user you automatically enable ONVIF communication. Use the user name and password with all ONVIF communication
with the product. For more information see www.onvif.org
IP Address Filter
IP address filtering is enabled on the System Options > Security > IP Address FilterSetup > Additional Controller Configuration >
System Options > Security > IP Address FilterPreferences > Additional Device Configuration > System Options > Security > IP
Address Filter page. Once enabled, the listed IP address are allowed or denied access to the Axis product. Select Allow or Deny
from the list and click Apply to enable IP address filtering.
56