How To Set Up Recurrences - Axis Q6000-E Mk II User Manual

AXIS Q6000-E Mk II PTZ Network Camera
Set up rules for events
Schedules can be used as action rule triggers or as additional conditions. Use one of the predefined schedules or create a new
schedule as described below.
To create a new schedule:
1. Go to Events > Schedules and click Add.
2. Enter a descriptive name and the information needed for a daily, weekly, monthly or yearly schedule.
3. Click OK.
1. Go to Setup > Additional Controller Configuration > Events > Schedules and click Add.
2. Enter a descriptive name and the information needed for a daily, weekly, monthly or yearly schedule.
3. Click OK.
To use the schedule in an action rule, select the schedule from the Schedule drop-down list in the Action Rule Setup page.

How to set up recurrences

Recurrences are used to trigger action rules repeatedly, for example every 5 minutes or every hour.
To set up a recurrence:
1. Go to Events > Recurrences and click Add.
2. Enter a descriptive name and recurrence pattern.
3. Click OK.
1. Go to Setup > Additonal Controller Configuration > Events > Recurrences and click Add.
2. Enter a descriptive name and recurrence pattern.
3. Click OK.
1. Go to Preferences > Additional Device Configuration > Events > Recurrences and click Add.
2. Enter a descriptive name and recurrence pattern.
3. Click OK.
To use the recurrence in an action rule, first select Time from the Trigger drop-down list in the Action Rule Setup page and then
select the recurrence from the second drop-down list.
To modify or remove recurrences, select the recurrence in the Recurrences List and click Modify or Remove.
51