Ptz (Pan Tilt Zoom); Control Queue; Remote Gatekeeper - Axis Q6000-E Mk II User Manual

AXIS Q6000-E Mk II PTZ Network Camera

PTZ (Pan Tilt Zoom)

PTZ (Pan Tilt Zoom)
The PTZ menu is available if a PTZ driver has been uploaded. See .
PTZ (pan, tilt and zoom) is available if you have enabled digital PTZ in the selected view area. For more information on view areas, see .
PTZ is available if you have selected Optical zoom for installation as PTZ mode. If Optical zoom for monitoring has been selected as
PTZ mode, view areas are disabled. For more information, see .
PTZ controls are only available for view areas.
PTZ (pan, tilt and zoom) is available if you have enabled digital PTZ in the selected view area or if a PTZ driver has been uploaded. For
more information on view areas, see . For more information on how to upload a driver, see . To switch between the two options see

Control queue

Note
• The administrator can enable and disable PTZ controls for selected users.
• To identify different users in the viewer group, cookies must be enabled on the client.
• The Control queue polltime is measured in seconds. For more information see the online help
The administrator can set up a queue for PTZ controllers from PTZ > Control Queue. Once set up, the PTZ Control Queue buttons
appear in the live view window offering one viewer exclusive control for a limited period of time. Other users will be placed in queue.
A user who belongs to a group (see Users on page 56) with a higher PTZ priority can go before other users in the queue and take
control of the product. The order of priority is as follows:
1. Administrator — An administrator takes over PTZ control regardless of who is first in queue. The administrator will be
removed from the queue 60 seconds after the last PTZ control command.
2. Event — The Axis product can be configured to go to a preset position when triggered by an alarm (see Set up rules for
events on page 41). The event will immediately be placed first in the queue except when an administrator is in control.
3. Operator — Same as administrator but with lower priority
4. Guard Tour — A guard tour (see ) has PTZ control for an indefinite period of time. It may be overridden by an operator,
event or administrator. The guard tour will resume when higher priority groups leave the queue.
5. Viewer — Multiple viewers must wait for their turn. The viewer has 60 seconds PTZ control before control is passed
on to the next viewer in queue.

Remote Gatekeeper

Gatekeeper monitors an area. When a motion detection triggers the Gatekeeper, the PTZ camera moves to a preset position.
Remote gatekeeper setup
Only one gatekeeper can be created under Setup > PTZ > Remote Gatekeeper. Additional gatekeepers must be created as separate
action rules, see How to create additional gatekeepers on page 32.
If you re-configure Remote Gatekeeper, this overwrites the previous configuration.
There are three steps to set up a gatekeeper:
1. Set up preset positions for each channel. You can create and save up to a maximum of 9 preset positions per channel. A
minimum of one preset position is required for the gatekeeper to work. The presets configured for each channel will be
added on the connected PTZ camera. See How to set up preset positions on page 32
31
.