Axis Q6000-E Mk II User Manual page 47

AXIS Q6000-E Mk II PTZ Network Camera
Set up rules for events
- Ready – Triggers an action rule when the PTZ functionality is ready to be used. This can for example be used to
steer the camera to a specific preset position when the product is started.
• Storage
- Available – Triggers an action rule when the storage device is unmounted or removed. This can for example be
used to send maintenance notifications.
- Disruption – Triggers an action rule if storage problems are detected, for example if the storage device is
unavailable, removed, full, locked or if other read or write problems occur. This can for example be used to
send maintenance notifications.
- Recording – Triggers an action rule when the Axis product records to the storage device. The recording status
trigger can be used to notify the operator, for example by flashing LED lights, if the product has started or
stopped to record to the storage device. Note that, this trigger can be used only for edge storage recording status.
- Full – Triggers an action rule when the storage device is full. Under normal operation, the oldest recordings
will be overwritten to prevent the storage device from becoming full.
- Locked – Triggers an action rule if the storage device is locked (write protected).
• Schedule
- Interval – Triggers an action rule at the schedule's start time and remains active until the schedule's end time
is reached.
- Pulse – Triggers an action rule when a one-time event occurs. That is, an event that happens at a specific
time and has no duration.
• System
- System Initializing – Triggers an action rule when the product is being started. This can for example be used to
send a notification when the product restarts.
- System Ready – Triggers an action rule when the product has been started and all services are running. This can
for example be used to send a notification when the product restarts.
- System Ready – Triggers an action rule when the system is in state ready. For example, the Axis product can
detect the system state and send a notification when the system has started.
Select Yes to trigger the action rule when the product is in state ready. Note that the rule will only trigger when
all necessary services, such as the event system, has started.
• Time
- Recurrence – Triggers an action rule by monitoring the recurrences that you have created. You can use this
trigger to initiate recurring actions such as sending notifications every hour. Select a recurrence pattern or create
a new one. For more information about setting up a recurrence pattern, see How to set up recurrences on page 51.
- Recurrence – Triggers an action rule periodically. See How to set up recurrences on page 51. This can for
example be used to upload an image every 5 minutes.
- Use Schedule – Triggers an action rule according to the selected schedule. See How to create schedules
on page 50.
Actions
You can configure several actions:
• Autotracking – Start autotracking. See .
• Axis Door Control – Control a door that is connected to an AXIS Network Door Controller.
• Day/Night Vision Mode – Set the day mode (IR cut filter on) or the night mode (IR cut filter off).
47