Toro 131-2814 Installation Instructions Manual page 3

Removing the Side-Cowl Panel
1. Remove the flange-head bolt (12 x 40 mm) that secures
the right-cowl panel to the ROPS-mounting plate
(Figure 5).
1. Flange-head bolt (12
x 40 mm)—upper
ROPS-mounting plate
2. Right-cowl panel
2. Remove the flange-head bolt (8 x 35 mm) that secures
the clamp for the hydraulic-tank breather and the
right-cowl panel to the firewall
3. Remove the right-cowl panel from the machine
6).
Note: Rotate the panel as needed to clear the exhaust
system components.
Figure 5
3. Clamp (hydraulic-tank
breather)
4. Flange-head bolt (8 x 35
mm)—firewall
(Figure 5)
(Figure
3
Figure 6