PCE Instruments PCE-AQD 50 User Manual page 41

Hide thumbs Also See for PCE-AQD 50:

Table of Contents

Available languages

Fig. 57 Alert selection

Fig. 58 Alert menu for pressure sensor

The alert menus for each sensor consist of a part w hich indicates if the alarm is enabled or not

and another part w hich indicates the limit value for the alert; once the measurement exceeds that

limit, the meter w ill beep and the LED w ill glow .

To enable/disable the alarm for a certain sensor, use the arrow keys ▲ and ▼ to select Set limit

and then press OK. If the alarm is enabled, the icon  w ill be displayed; if not, nothing w ill be

displayed.

To set the limit, select Value and press OK. Then, the digit selected for changing w ill be

highlighted in w hite (fig. 22). The default values for the alarm are 30 ºC, 80 % RH, 1000 h Pa,

1000 ppm (green limit) and 2000 ppm (yellow lim it).

The LED w ill turn off w hen you disable all alarms or w hen the parameters w ith a set alarm fall

below the limit value set.

Fig. 59 Set value for alarm

Table of Contents

4250348727459