PCE Instruments PCE-AQD 50 User Manual page 39

5.4.3.2 Date and tim e submenu
In this submenu, you can set the time and date of the device as w ell as their formats (fig. 17). Use
the arrow keys ▲ and ▼ to select the parameter you w ant to change and press OK.
After selecting Time or Date, the device w ill highlight the digit to be modified in w hite. You can
change the digit using the ◄ and ► keys and its value w ith the ▲ and ▼ keys. Once the time or
date is set, press OK to update the data in the display and in the system.
Note:
The time and date w ill be autocorrected when their maximum values are exceeded. For example,
if the actual date is 31 January and the user tries to increase the 1, it w ill be updated to a 0.
Fig. 52 Time and date submenu
Fig. 53 Time change
Fig. 54 Date change
© PCE Instruments
36