Cisco 7970G User Manual page 20

Meet Me Conference
Create Conference by Barging Call on Shared Line
Procedure
Step 1
Press the line button for the shared line.
Step 2 In some cases, you must highlight the call and press cBarge to complete the action.
Meet Me Conference
Meet Me conferencing enables you to start or join a conference by calling the conference number.
Tips
• If you call a secure Meet Me conference number from a nonsecure phone, your phone displays the
• A Meet Me conference ends when all participants hang up.
• If the conference initiator disconnects, the conference call continues until all participants hang up.
Start Meet Me Conference
Participants cannot join the conference until the initiator starts the conference.
Procedure
Step 1
Obtain a Meet Me phone number from your system administrator.
Step 2 Distribute the number to participants.
Step 3 When you are ready to start the meeting, go off-hook to get a dial tone, then press MeetMe.
Step 4 Dial the Meet Me conference number.
Participants can now join the conference by dialing the Meet Me number.
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G User Guide for Cisco Unified Communications
Manager 9.0 (SCCP and SIP)
20
message Device Not Authorized. For more information, see
Calling Features
Secure Calls, on page 32.