Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for BLAUBERG Auto
Summary of Contents for BLAUBERG Auto
- Page 1 Auto Service Instructions...
-
Page 2: Complete Set
BLAUBERG Auto. The BLAUBERG Auto fan is designed for exhaust ventilation of residential and public premises heated during winter season. The fan is designed for wall or ceiling mounting (fig. 3-5). -
Page 3: Basic Characteristics
Power [W] RPM [min ] Type 3 m [dBA] air flow [m /h] Auto 100 2300 Auto 125 2400 Auto 150 2400 Auto Still 100 1715 Auto Still 125 11,8 1930 22,8 Auto Still 150 1904 Table 2 Motion Humidity... - Page 4 Fig. 1 1 - cover; 2 - casing; 3 - motor; 4 - impeller. Table 3 Dimensions [mm] Weight Type [kg] 0,56 Auto 100 Auto 125 0,73 Auto 150 Fig. 2...
-
Page 5: Operation Rules
OPERATION RULES The fan is rated for connection to 220...240 V / 50 Hz power mains and is designed for continuous operation always connected to power mains. The air motion direction in the system must match the pointer on the fan casing. - Page 6 The product is not allowed for use by children and persons with reduced physical, mental or sensory capacities, without proper practical experience or expertise, unless they are controlled or instructed on the product operation by the person(s) responsible for their safety. Supervise the children and do not let them play with the product.
-
Page 7: Mounting And Setup
MOUNTING AND SETUP The fan is designed for ceiling or wall mounting to extract air into a ventilation shaft or matching air duct of respective diameter (fig. 3-7). The fan mounting sequence is shown in fig. 8-9. The fan wiring diagrams are shown in fig. 10-16. Fig. - Page 8 Fig. 6 Fig. 7 Fig. 8 Fig. 9...
- Page 9 Fan does not run Switch is closed Fan runs Switch is opened S - external switch QF - automatic switch Fig. 11 Auto 100 S Fan does not run Pull cord switch Fan runs Pull cord switch QF - automatic switch...
- Page 10 Fig. 12 Auto 100 T Fan does not run Switch is closed Fan runs Switch is opened Turn-off delay timer 2min starts (2 to 30 min) 30min S - external switch QF - automatic switch Fig. 13 Auto 100 ST...
- Page 11 Fig. 14 Auto 100 H 2min 30min S - external switch QF - automatic switch Fan does not run Switch is closed Humidity exceeds set point Fan runs Fan runs Switch is opened Humidity is below set point Humidity exceeds...
- Page 12 Fig. 15 Auto 100 SH 2min 30min QF - automatic switch Fan does not run Pull cord switch Humidity exceeds set point Fan runs Fan runs Pull cord switch Humidity is below set point Humidity exceeds set point Turn-off delay timer...
- Page 13 Fig. 16 Auto 100 IR Fan does not run Motion is detected Fan runs No motion detected 2min 30min Turn-off delay timer starts (2 to 30 min) QF - automatic switch Fig. 17 Warning! The timer circuit is under mains voltage!
-
Page 14: Maintenance
MAINTENANCE Any servicing and maintenance operations of the fan are allowed after it is disconnected from power mains only. Maintenance means regular cleaning of the fan surfaces from dirt and dust. To clean the fan, wipe its surfaces with a cloth wetted in a mild soap solution, then wipe the surfaces dry. -
Page 15: Warranty Card
Protection degree index according to IP rating against access to hazardous parts and water ingress - IP24. The manufacturer hereby warrants normal operation of the fan over the period of five years from the retail sale date provided observance of the installation and operation regulations. - Page 16 Auto Auto Still model is recognized as serviceable. SALES DATE SOLD MANUFACTURED ON (DATE): APPROVAL MARK AUTO_DE_EN-02...
Need help?
Do you have a question about the Auto and is the answer not in the manual?
Questions and answers