Advertisement
Quick Links
Advertisement
Related Manuals for BLAUBERG Auto Revers series
Summary of Contents for BLAUBERG Auto Revers series
- Page 1 Auto Revers OPERATION MANUAL...
- Page 2 Follow the user's manual requirements to ensure durable and trouble-free operation of the unit WARNING Disconnect the unit from power supply prior to any connection, servicing and repair operations. Only qualified electricians with a work permit for electrical units up to 1000 V are allowed for installation and maintenance.
- Page 3 Follow the user's manual requirements to ensure durable and trouble-free operation of the unit WARNING While mounting the unit, avoid compression of the casing! Deformation of the casing may result in the motor jam and noisy operation. Misuse of the unit and any unauthorized modifications are not allowed. Take steps to prevent ingress of smoke, carbon monoxide, and other combustion products into the room through open chimney flues or other fire-protection devices.
- Page 4 Follow the user's manual requirements to ensure durable and trouble-free operation of the unit WARNING Do not use the unit in a hazardous or explosive environment containing spirits, gasoline, insecticides, etc. Do not close or block the intake or extract vents in order to ensure the efficient air flow.
- Page 5 Follow the user's manual requirements to ensure durable and trouble-free operation of the unit WARNING The unit is allowed to be used by children aged from 8 years old and above and persons with reduced physical, sensory, or mental capabilities or no experience and knowledge provided that they have been given supervision or instruction regarding safe use of the unit and understand the risks involved.
-
Page 6: Delivery Set
Read the user's manual carefully before proceeding with installation works. Compliance with the manual requirements ensures reliable operation and long service life of the unit. Keep the user's manual available as long as you use the unit. DELIVERY SET 1. Fan:1 piece; 2. - Page 7 ATTENTION! All the electrical connections to the control unit and the fan must be made using plug-in terminal blocks. Each terminal block receptacle has a numeric marking with a corresponding marking on the circuit board for quick and convenient connection. The colour markings of the wires correspond to the cable supplied with the unit.
-
Page 8: Fan Control
FAN CONTROL The control unit enables setting one of the four operation modes (Fig. 13): 1. Air extract mode at the low speed 2. Air extract mode at the high speed 3. Air supply mode at the low speed 4. Air supply mode at the high speed ATTENTION! The potentiometers for speed and time control on the fan circuit board are set in the factory for correct operation and must not be changed by the user. - Page 9 Manufacturer's warranty The product is in compliance with EU norms and standards on low voltage guidelines and electromagnetic compatibility. We hereby declare that the product complies with the protection requirements of Electromagnetic Council Directive 2014/30/EU, Low Voltage Directive 2014/35/EU and CE-marking Directive 93/68/EEC on the approximation of the laws of the Member States relating to electromagnetic compatibility.
- Page 10 Auto Revers 0.5°...1°...
- Page 12 2 radii Exhaust/supply* mode High speed Activation Deactivation Low speed Reverse operation...
- Page 13 Control unit JMP1 Flow out Flow in (exhaust) (supply) 40 39 38 37 Marking "11...15" on the ~ 230 V controller socket connector JMP1 Marking "11...15" on the White controller socket connector White Speed1 Speed2 ~ 230 V Speed0 Timer Grey Brown Grey...
- Page 15 Auto Revers Auto Revers 150 CERRTIFICATE OF ACCEPTANCE The fan is recognized as serviceable. Stamp of the acceptance inspector Manufacturing date Sold by (name of the vendor, stamp of the shop) Date of sale WARRANTY CARD...
- Page 16 www.blaubergventilatoren.de Auto Revers_EN v.1(4)
Need help?
Do you have a question about the Auto Revers series and is the answer not in the manual?
Questions and answers